RTM-T provides a fast data path direct to gigabit serial links:
Available now, the PCI-Express (PCIe) on Cable interface transfers data direct to a host PC adapter. D‑TACQ firmware uses an efficient DMA implementation capable at streaming data at over 200MBytes/second with minimum host computer overhead. The interface adheres to the the "PCIe on Cable" standard, allowing use of low cost off the shelf cabling and cable adapters.
* ACQ164CPCI can already stream full rate data direct to Gigabit Ethernet.
The data interface is capable of streaming data indefinitely.
Streaming to disk is supported, to the limit of attached disk storage size.
Multiple cards can stream data to the same host, to the limit of host bus transfer capacity. Since each ACQ196CPCI or ACQ132CPCI card has its own RTM-T card and therefore its own dedicated data link, this solution is highly scalable.
RTM-T may be retrofitted to existing cards.
The Fiber SFP interface will in the future provide an isolated streaming data interface. It is also possible to link to existing fiber-optic precision timing systems, provided the protocol is available. RTM-T features a modern, high performance FPGA device with a large amount of free resource to facilitate this.
The Gigabit Ethernet interface will support IEEE-1588 PTP.