| Overview |
| Model Range |
| Specifications |
| Data Sheet |
 ACQ216CPCI |
| ACQ216CPCI-16-50-M2 assembled |
 ACQ216CPCI-16-50-M5-RTM-DDS |
| ACQ216CPCI-16-50-M5-RTM-DDS |
 M2 components |
| With mezzanine Removed |
 M5 mezzanine (detached) |
| M5 Mezzanine |
ACQ216CPCI 16 channel 15..50 MSPS Simultaneous Digitizer
| Part Number | Channels | Max Sample Rates | |||
| ACQ216CPCI-16-50 | 16 | 16c x 15M | 12c x 20M | 8c x 25M | 4c x 50M |
| ACQ216CPCI-16-25 | 16* | 16c x 15M | 12c x 20M | 8c x 25M | 4c x 25M |
| ACQ216CPCI-08-50 | 8 | 8c x 25M | 4c x 50M | ||
| ACQ216CPCI-08-25 | 8* | 8c x 25M | 4c x 25M | ||
| ACQ216CPCI-04-50 | 4 | 4c x 50M | |||
| c: channels | M: MSPS/channel | * MOQ applies |
- Full Order Code: ACQ216CPCI-CC-SP-Mx-RTMy
- CC- channel code (16/8/4)
- SP speed code (25/50)
- Mx choose analog input Mezzanine from options below:
- RTMy choose Rear Transition Module from options below:
Mezzanine Options
| M2 | Protected Differential input with wide common mode range, soft switched attenuation |
16 differential inputs with dual pin LEMO connector per channel. |
|
| Input impedance: 10K Ω (differential, 5K Ω to ground) or 50 Ω (factory option) | |
| Software selected input voltage ranges: ±2.5V, ±4V, ±6V, ±10V |
|
| Input protected to ±30V | |
| Wide common mode range ±13V | |
| M6 | Protected Differential input with wide common mode range, and switched attenuation |
| Identical to M2, but with floating SMA connector per channel |
|
| M7 | Protected Differential input with wide common mode range, and switched attenuation |
| Identical to M2, but with a single HD68 front panel connector, suitable for connection to external termination. |
|
| M8 | Protected Differential input with wide common mode range, and switched attenuation |
| Identical to M2, but with a floating single-pin LEMO front panel connector per channel. |
|
| M5 | Differential input high impedance input, switched gain and wide input offset adjust |
| 16 differential inputs with dual pin LEMO connector per channel. |
|
| Software selected gain, with 6 input voltage ranges: ±30mV, ±50mV, ±625mV ±1V, ±1.9V, ±3V |
|
| Input impedance: 200 kΩ (default) or 50 Ω (factory option) | |
| Input protected to ±30V | |
| Wide common mode range ±13V | |
| Software controlled per channel input offset adjust | |
| Requires RTM-DDS5 |
Rear Transition Module Options
| RTM-1 | Console, Dual Gigabit ethernet, DIO |
| Console RS232 | |
| Gigabit ethernet on copper, 2x RJ45 | |
| 6 isolated direct digital inputs (DI6) | |
| 32 programmable digital IO (DIO32) | |
| RTM-DDS | RTM-1 plus |
| Precision clock device - Direct Digital Synthesis DDS - 1..100MHz in 1Hz steps, external clock multiplication with minimum jitter. | |
| RTM-DDS5 | RTM-DDS plus |
| Additional analog power module for M5 mezzanine |
