| Overview |
| Model Range |
| Specifications |
| Data Sheet |
 ACQ132CPCI |
 ACQ132CPCI |
 ACQ132CPCI-LFP |
ACQ132CPCI 32 channel 2 MSPS Simultaneous Digitizer
| ACQ132-32-02C | ACQ132-32-32F ACQ132-32-40G |
ACQ132-32-40G-LFP ACQ132-32-65G-LFP |
||
| Number Of Channels | 32 (16 channels by build option) | |||
| Form Factor | 6U CPCI 4HP |
6U CPCI 8HP |
||
| Analog Input connector | 2 x HD68 [0] |
32 x isolated LEMO connectors |
||
| Input Sample Rate | Up to 10 MSPS/channel | Up to 40 MSPS/channel | Up to 65 MSPS/channel | |
| Digital Filter | Average of 1..16 samples | Average of 1..16 samples option:500 tap FIR |
Average of 1..16 samples | |
| Output Sample Rate/ Throughput |
2 MSPS/channel (32 channels), 4 MSPS/channel (16 channels), 8 MSPS/channel (8 channels) [5] | |||
| Resolution | 14 bits [2] | |||
| Coupling | DC, Differential Input | |||
| Sampling | Simultaneous | |||
| Voltage Range (software-select) |
±10V / ±2.5V | ±2.5V / ±1V | ||
| Input Impedance | 10kΩ / 100kΩ | 2kΩ / 100kΩ | ||
| Common Mode Range | ±13V / ±3.5V | ±3.5V / ±1.4V | ||
| Input Voltage Withstand | ±80V | |||
| Offset Error | Numerical adjust to 0.1% FS [3] | |||
| Gain Error | Numerical adjust to 0.1% FS [3] | |||
| INL | ±3 LSB | |||
| DNL | ±1 LSB | |||
| CMRR | >60dB FS @ 1 kHz | |||
| THD | >-84 dB | |||
| SINAD | -72 dB [1] | |||
| SFDR | 88 dBc [1] | |||
| SNR | 72 dB [1] | |||
| Full Power BW | 2.5 MHz | 40MHz, option AAF [4] | ||
| Small Signal BW | 2.5 MHz | 40MHz | ||
| Crosstalk (3 dB) | <88 dB @ 1 MHz FS Input | <88 dB @ 2MHz FS Input | ||
| Temperature Stability | <25 ppm/C | |||
[0] : 2 x HD68 connector - 16 channels per connector, alternate signal pair and ground for improved crosstalk.
Also available with LFP on special order
[1] : Typical values measured at full scale with a 1MHz input.
[2] : 14 bit resolution with no oversampling, 16X oversampling can raise the resolution to 16 bit effective.
[3] : via post processing numerical adjust using onboard calibration table
[4] : AAF factory build options, 4 pole filter with cut-off at either on 2.5, 5.0, 10, 20 MHz
[5] : Other multi-rate options possible
ACQ132 Platform Features
| Item | Description |
| Form Factor | Compact PCI, 6U. Fully Compliant PICMG 2.0R3. PCI System and peripheral Slot capable Bus Isolation mode for standalone networked operation |
| Onboard Memory | 1 Gigabyte |
| Backplane Bus Interface | PCI 32 bit, 33/66MHz |
| Network Interface | 1 Channel Gigabit 1000 base T ethernet, (copper) |
| Network Connector | RJ45 socket on front panel. |
| RS232 Connector | (optional) HD9 socket on RTM |
| Synchronization | 6 software routed DIO lines, can be switched to PXI signaling lines |
| External CLK input | LEMO connector on front panel connects opto-isolated DIO line |
| External TRG input | LEMO connector on front panel connects opto-isolated DIO line |
| Gate Pulse Generator | 4 bits, Programmable - arbitrary gate pattern. |
| Internal CLK | PLL clock 4..100MHz in 1kHz steps. |
| FPGA |
9 x Xilinx SPARTAN, DSP capable. |
Optional Analog Output (RTM-AO16)
| Item | Description |
| Number of Channels | 16 |
| Conversion Time | 1usec |
| Resolution | 16 bit |
| Output Range | ±10V |
| Reconstruction Filter | 1pole |
| AWG | Not recommended with ACQ196. Use AO32CPCI |
| Digital I/O | |
| Number | 6 |
| Switching Characteristics | TTL |
| Maximum Clock Rate | 40MHz |
| Minimum High Time for Trigger | 100 nS |
| Minimum Low Time for Trigger | 100 nS |
ACQ196 Rear Transition Module Features
| Item | RTM1 | |
| Ethernet | 100 Base T1 x RJ45 (copper) | |
| Console | 9 Way D-Type (38kbaud default) | |
| Isolated DI | 4 lines isolated input | |
| DIO | 32 Bits, programmable direction | |
